The John Deere 8100 is 120.2 in tall, with a 122.8 in wheelbase.
Height120.2 in (10 ft 0.2 in) / 3,053.1 mm
Wheelbase122.8 in (10 ft 2.8 in) / 3,119.1 mm
Ground clearance23.2 in (1 ft 11.2 in) / 589.3 mm
John Deere 8100 Dimensions
Overall height
120.2 in (10 ft 0.2 in) / 3,053.1 mm
Wheelbase
122.8 in (10 ft 2.8 in) / 3,119.1 mm
Ground clearance
23.2 in (1 ft 11.2 in) / 589.3 mm
Tractor Size Comparison Chart
Overall height comparison
This model
120.2 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
122.8 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
23.2 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 8100 Extra Dimension Notes
Storage fit note
The John Deere 8100 is not something to squeeze into tight domestic storage. With height 120.2 in (10 ft 0.2 in) / 3,053.1 mm, use machinery-shed expectations.
Fitment note
The John Deere 8100 has listed dimensions of height at 120.2 in (10 ft 0.2 in) / 3,053.1 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 8100 wheelbase is listed at 122.8 in (10 ft 2.8 in) / 3,119.1 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Ground clearance note
The John Deere 8100 shows 23.2 in (1 ft 11.2 in) / 589.3 mm ground clearance. That is the underside clearance figure in the dimension set.
Storage Tips
Leave room around the John Deere 8100 for mirrors, steps, tires, cab/ROPS and attachments.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 122.8 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
Will it fit in a garage?
With 120.2 in height and width not captured width, the doorway is the first limit; with length not captured length, bay depth is the second. Start with 14 ft high, not the bare dimensions.
What size door should I check?
A good doorway should let the tractor enter straight without clipping mirrors, tires or door tracks. With width not captured width and 120.2 in height, use around the tractor width plus side clearance wide and 14 ft high.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, width not captured wide and 120.2 in tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 122.8 in wheelbase, about 24 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
