For indoor storage, the John Deere 4052R is plausible in smaller spaces. With width 59.9 in (4 ft 11.9 in) / 1,521.5 mm, confirm height first.
Fitment note
The captured size specs for the John Deere 4052R are width at 59.9 in (4 ft 11.9 in) / 1,521.5 mm. That is enough to make a first-pass storage or transport call.
Ground clearance note
The John Deere 4052R has 13.8 in (1 ft 1.8 in) / 350.5 mm ground clearance in the captured data. That is the underbody clearance figure to compare.
Tread width note
The John Deere 4052R rear tread width comes through as 59.9 in (4 ft 11.9 in) / 1,521.5 mm. Check front tread separately if row spacing matters.
Storage Tips
The John Deere 4052R is one of the easier tractor sizes to store, but a loader, mower deck or canopy can quickly change the fit.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or 59.9 in wide, count it as too tight. The safer check for the John Deere 4052R is around 10 ft wide.
What size door should I check?
Use 10 ft wide as the door-and-bay target. That is based on the tractor’s height not captured height, 59.9 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 59.9 in wide and height not captured tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
Because the John Deere 4052R is length not captured long and 59.9 in wide, do not plan on turning sharply at the doorway. Leave about a clear straight approach before the doorway to line up before entering.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
