The John Deere 4240 is 95.3 in wide, with a 106.6 in wheelbase.
Width95.3 in (7 ft 11.3 in) / 2,420.6 mm
Wheelbase106.6 in (8 ft 10.6 in) / 2,707.6 mm
Ground clearance22.2 in (1 ft 10.2 in) / 563.9 mm
John Deere 4240 Dimensions
Overall width
95.3 in (7 ft 11.3 in) / 2,420.6 mm
Wheelbase
106.6 in (8 ft 10.6 in) / 2,707.6 mm
Ground clearance
22.2 in (1 ft 10.2 in) / 563.9 mm
Rear tread width
30.3 in (2 ft 6.3 in) / 769.6 mm
Tractor Size Comparison Chart
Overall width comparison
This model
95.3 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
106.6 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
22.2 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 4240 Extra Dimension Notes
Storage fit note
The John Deere 4240 can fit smaller farm storage setups if the opening is right. With width 95.3 in (7 ft 11.3 in) / 2,420.6 mm, do not ignore cab/ROPS height.
Fitment note
The John Deere 4240 fitment specs show width at 95.3 in (7 ft 11.3 in) / 2,420.6 mm. That is the practical buyer information for size.
Wheelbase note
For the John Deere 4240, the captured wheelbase is 106.6 in (8 ft 10.6 in) / 2,707.6 mm. A longer wheelbase generally favors stability, while a shorter one usually feels more compact.
Ground clearance note
The John Deere 4240’s clearance measurement is 22.2 in (1 ft 10.2 in) / 563.9 mm. It is a practical number for rough tracks and crop work.
Tread width note
The John Deere 4240 rear wheel tread is 30.3 in (2 ft 6.3 in) / 769.6 mm. Treat the front tread as unconfirmed here.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere 4240.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
The John Deere 4240 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 106.6 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
If the tractor has wider tire settings, duals or spacers, recheck the actual width.
Storage FAQ
Will it fit in a garage?
At 95.3 in wide and 106.6 in wheelbase, a tall garage or small shed is the realistic starting point. Use about 12 ft wide before counting attachments.
What size door should I check?
For this storage class, the safer number is 12 ft wide. That keeps the doorway and bay ahead of the tractor’s actual height not captured height, 95.3 in width and length not captured length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this very large farm tractor, allow about 8 ft to 15 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 12 ft target, approach angle matters more. The John Deere 4240’s 95.3 in width and 106.6 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
