The John Deere 2305 is 33.6 in wide, with a 57.1 in wheelbase.
Width33.6 in (2 ft 9.6 in) / 853.4 mm
Wheelbase57.1 in (4 ft 9.1 in) / 1,450.3 mm
Ground clearance7.7 in / 195.6 mm
John Deere 2305 Dimensions
Overall width
33.6 in (2 ft 9.6 in) / 853.4 mm
Wheelbase
57.1 in (4 ft 9.1 in) / 1,450.3 mm
Ground clearance
7.7 in / 195.6 mm
Rear tread width
33.6 in (2 ft 9.6 in) / 853.4 mm
Tractor Size Comparison Chart
Overall width comparison
This model
33.6 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
57.1 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
7.7 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 2305 Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 2305 is not oversized. With width 33.6 in (2 ft 9.6 in) / 853.4 mm, a good garage, carport or compact shed may be workable.
Fitment note
The John Deere 2305 fitment specs show width at 33.6 in (2 ft 9.6 in) / 853.4 mm. That is the practical buyer information for size.
Wheelbase note
For the John Deere 2305, the captured wheelbase is 57.1 in (4 ft 9.1 in) / 1,450.3 mm. A longer wheelbase generally favors stability, while a shorter one usually feels more compact.
Ground clearance note
The John Deere 2305’s clearance measurement is 7.7 in / 195.6 mm. It is a practical number for rough tracks and crop work.
Tread width note
The John Deere 2305 rear wheel tread is 33.6 in (2 ft 9.6 in) / 853.4 mm. Treat the front tread as unconfirmed here.
Storage Tips
For the John Deere 2305, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
The John Deere 2305 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 57.1 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
The tractor itself is 33.6 in wide and 57.1 in wheelbase. For storage, that means the opening should be closer to the tractor height plus clearance high and 8 ft wide, with about the tractor length plus attachment room of usable depth.
What size door should I check?
Do not size the door to exactly height not captured by 33.6 in. For this model, use about the tractor height plus clearance height and 8 ft width, then allow the tractor length plus attachment room depth for the length not captured tractor length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this very large farm tractor, allow about 8 ft to 15 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 8 ft target, approach angle matters more. The John Deere 2305’s 33.6 in width and 57.1 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
