The John Deere 2250 is 65.5 in wide, with a 78.7 in wheelbase.
Width65.5 in (5 ft 5.5 in) / 1,663.7 mm
Wheelbase78.7 in (6 ft 6.7 in) / 1,999 mm
Ground clearance14.2 in (1 ft 2.2 in) / 360.7 mm
John Deere 2250 Dimensions
Overall width
65.5 in (5 ft 5.5 in) / 1,663.7 mm
Wheelbase
78.7 in (6 ft 6.7 in) / 1,999 mm
Ground clearance
14.2 in (1 ft 2.2 in) / 360.7 mm
Tractor Size Comparison Chart
Overall width comparison
This model
65.5 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
78.7 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
14.2 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 2250 Extra Dimension Notes
Fitment note
The John Deere 2250 has listed dimensions of width at 65.5 in (5 ft 5.5 in) / 1,663.7 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 2250 wheelbase is listed at 78.7 in (6 ft 6.7 in) / 1,999 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Ground clearance note
The John Deere 2250 shows 14.2 in (1 ft 2.2 in) / 360.7 mm ground clearance. That is the underside clearance figure in the dimension set.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 78.7 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or 65.5 in wide, count it as too tight. The safer check for the John Deere 2250 is around 10 ft wide.
What size door should I check?
Use 10 ft wide as the door-and-bay target. That is based on the tractor’s height not captured height, 65.5 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 65.5 in wide and height not captured tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 78.7 in wheelbase, about 15 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
