The John Deere 846 is 120 in long, 65.4 in wide, and 72 in tall, with a 61 in wheelbase.
Length120 in (10 ft 0 in) / 3,048 mm
Width65.4 in (5 ft 5.4 in) / 1,661.2 mm
Height72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase61 in (5 ft 1 in) / 1,549.4 mm
John Deere 846 Dimensions
Overall length
120 in (10 ft 0 in) / 3,048 mm
Overall width
65.4 in (5 ft 5.4 in) / 1,661.2 mm
Overall height
72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase
61 in (5 ft 1 in) / 1,549.4 mm
Tractor Size Comparison Chart
Overall length comparison
This model
120 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
65.4 in
Average
64.6 in
Low
20 in
High
144 in
Overall height comparison
This model
72 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
61 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere 846 Extra Dimension Notes
Storage fit note
For shed fit, the John Deere 846 is not oversized. With length 120 in (10 ft 0 in) / 3,048 mm, width 65.4 in (5 ft 5.4 in) / 1,661.2 mm, and height 72 in (6 ft 0 in) / 1,828.8 mm, a good garage, carport or compact shed may be workable.
Wheelbase note
The John Deere 846 wheelbase sits at 61 in (5 ft 1 in) / 1,549.4 mm. It is worth checking beside width and height, not in isolation.
Storage Tips
For the John Deere 846, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Wheelbase is 61 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
Storage FAQ
Will it fit in a garage?
Because the John Deere 846 is 72 in tall and 65.4 in wide, door track height and side posts matter. Because it is 120 in long, the bay also needs about 15 ft of usable depth.
What size door should I check?
Use the John Deere 846’s dimensions directly: 72 in tall needs more than a 72 in opening, 65.4 in wide needs side clearance, and 120 in long needs about 15 ft bay depth.
Do attachments change the storage size?
Yes. If the storage target is 7 ft high, 8 ft wide, and 15 ft deep, attachments should be checked against that, not against the bare 120 in length alone.
How much maneuvering room should I allow?
Because the tractor is 120 in long with a 61 in wheelbase, avoid turning sharply right at the doorway. A straight approach around 12 ft is safer.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
