The John Deere 1140 is 120 in long, 72 in wide, and 72 in tall, with a 100 in wheelbase.
Length120 in (10 ft 0 in) / 3,048 mm
Width72 in (6 ft 0 in) / 1,828.8 mm
Height72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase100 in (8 ft 4 in) / 2,540 mm
John Deere 1140 Dimensions
Overall length
120 in (10 ft 0 in) / 3,048 mm
Overall width
72 in (6 ft 0 in) / 1,828.8 mm
Overall height
72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase
100 in (8 ft 4 in) / 2,540 mm
Tractor Size Comparison Chart
Overall length comparison
This model
120 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
72 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
72 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
100 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 1140 Extra Dimension Notes
Fitment note
The John Deere 1140 fitment answer depends on length at 120 in (10 ft 0 in) / 3,048 mm, width at 72 in (6 ft 0 in) / 1,828.8 mm, and height at 72 in (6 ft 0 in) / 1,828.8 mm. These are the numbers to compare with your real storage space.
Wheelbase note
The John Deere 1140 has a 100 in (8 ft 4 in) / 2,540 mm wheelbase, giving it a compact tractor stance in practical terms.
Storage Tips
Recommended storage clearance: target about 84 in (7 ft) clear height; target about 96 in (8 ft) clear width; target about 180 in (15 ft) bay depth.
Do not assume residential garage fit unless height and bay depth both clear comfortably.
A 100 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
The John Deere 1140 is 120 in long, 72 in wide and 72 in tall, so a garage only makes sense if it beats those numbers with real clearance. A practical check is 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Start with the hard numbers: 72 in high, 72 in wide and 120 in long. Then step up to a practical storage target of about 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. Treat 120 in as the bare length only. If front or rear gear stays fitted, add roughly 3 ft to 6 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 100 in wheelbase and 72 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
