The John Deere F687 tractor hydraulic pump flow is 10.5 GPM, and hydraulic system pressure is 2,000 psi.
Hydraulic pump flow10.5 GPM
Implement flow10.5 GPM
Total hydraulic flow10.5 GPM
Hydraulic pressure2,000 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity5.5 qt (1.4 gal)
John Deere F687 Hydraulic Flow Details
Hydraulic pump flow
10.5 GPM
Implement hydraulic flow
10.5 GPM
Total hydraulic flow
10.5 GPM
Hydraulic system pressure
2,000 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
5.5 qt (1.4 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
10.5 GPM
Average
33.4 GPM
Low
2.5 GPM
High
78 GPM
Implement hydraulic flow comparison
This model
10.5 GPM
Average
32.8 GPM
Low
2.4 GPM
High
115 GPM
Total hydraulic flow comparison
This model
10.5 GPM
Average
33.6 GPM
Low
2.4 GPM
High
85 GPM
Hydraulic pressure comparison
This model
2,000 psi
Average
2,569.3 psi
Low
300 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
1.4 gal
Average
26.1 gal
Low
0.6 gal
High
79.3 gal
John Deere F687 Extra Hydraulic Notes
Hydraulic flow note
With about 10.5 GPM implement flow, the John Deere F687 sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
Hydraulic pressure on the John Deere F687 is 2,000 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (10.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere F687: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere F687 is 5.5 qt (1.4 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
