The John Deere 1550 tractor hydraulic pump flow is 5.8 GPM, and hydraulic system pressure is 2,756 psi.
Hydraulic pump flow5.8 GPM
Implement flow5.8 GPM
Total hydraulic flow5.8 GPM
Hydraulic pressure2,756 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity8.5 gal
John Deere 1550 Hydraulic Flow Details
Hydraulic pump flow
5.8 GPM
Implement hydraulic flow
5.8 GPM
Total hydraulic flow
5.8 GPM
Hydraulic system pressure
2,756 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
8.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
5.8 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
5.8 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
5.8 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,756 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
8.5 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 1550 Extra Hydraulic Notes
Hydraulic flow note
With about 5.8 GPM implement flow, the John Deere 1550 sits in the low-flow compact tractor range and is best suited to loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
The John Deere 1550’s hydraulic pressure is listed at 2,756 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (5.8 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 1550 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 1550 is 8.5 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
