The John Deere 1030 tractor hydraulic pump flow is 13.5 GPM, and hydraulic system pressure is 2,100 psi.
Hydraulic pump flow13.5 GPM
Implement flow14.5 GPM
Total hydraulic flow10.5 GPM
Hydraulic pressure2,100 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity16.4 gal
John Deere 1030 Hydraulic Flow Details
Hydraulic pump flow
13.5 GPM
Implement hydraulic flow
14.5 GPM
Total hydraulic flow
10.5 GPM
Hydraulic system pressure
2,100 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
16.4 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
13.5 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
14.5 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
10.5 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
2,100 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
16.4 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 1030 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 1030 should be matched to implements that fit its 14.5 GPM hydraulic-flow range.
Hydraulic pressure note
The John Deere 1030’s hydraulic pressure is listed at 2,100 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (14.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 1030 uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
For maintenance, the John Deere 1030’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
