The John Deere 900HC tractor hydraulic pump flow is 8 GPM, and hydraulic system pressure is 790 psi.
Hydraulic pump flow8 GPM
Implement flow8 GPM
Total hydraulic flow14 GPM
Hydraulic pressure790 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity4 gal
John Deere 900HC Hydraulic Flow Details
Hydraulic pump flow
8 GPM
Implement hydraulic flow
8 GPM
Total hydraulic flow
14 GPM
Hydraulic system pressure
790 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
4 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
8 GPM
Average
17.3 GPM
Low
1.2 GPM
High
110 GPM
Implement hydraulic flow comparison
This model
8 GPM
Average
17.1 GPM
Low
1.2 GPM
High
110 GPM
Total hydraulic flow comparison
This model
14 GPM
Average
16.5 GPM
Low
1.2 GPM
High
70 GPM
Hydraulic pressure comparison
This model
790 psi
Average
2,330.1 psi
Low
435 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
4 gal
Average
8.6 gal
Low
0.6 gal
High
30.1 gal
John Deere 900HC Extra Hydraulic Notes
Hydraulic flow note
The John Deere 900HC separates implement flow from total hydraulic flow: 8 GPM is the more useful number for rear remotes and hydraulic implements, while 14 GPM includes the wider system total.
Hydraulic pressure note
Hydraulic pressure on the John Deere 900HC is 790 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (8 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 900HC: closed-center pressure-flow compensated affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 900HC is 4 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
