The John Deere 5210 tractor hydraulic pump flow is 11.4 GPM, and hydraulic system pressure is 2,855 psi.
Hydraulic pump flow11.4 GPM
Implement flow11.4 GPM
Total hydraulic flow11.4 GPM
Hydraulic pressure2,855 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity40 qt (10 gal)
John Deere 5210 Hydraulic Flow Details
Hydraulic pump flow
11.4 GPM
Implement hydraulic flow
11.4 GPM
Total hydraulic flow
11.4 GPM
Hydraulic system pressure
2,855 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
40 qt (10 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
11.4 GPM
Average
22 GPM
Low
5.3 GPM
High
59 GPM
Implement hydraulic flow comparison
This model
11.4 GPM
Average
21.7 GPM
Low
5.3 GPM
High
43 GPM
Total hydraulic flow comparison
This model
11.4 GPM
Average
21.9 GPM
Low
4 GPM
High
60 GPM
Hydraulic pressure comparison
This model
2,855 psi
Average
2,726.4 psi
Low
435 psi
High
3,046 psi
Hydraulic fluid capacity comparison
This model
10 gal
Average
14.9 gal
Low
2.8 gal
High
43.7 gal
John Deere 5210 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 5210 should be matched to implements that fit its 11.4 GPM hydraulic-flow range.
Hydraulic pressure note
Hydraulic pressure on the John Deere 5210 is 2,855 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (11.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 5210: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
For maintenance, the John Deere 5210’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
