Quick answer:
The John Deere 5200 tractor hydraulic pump flow is 10.9 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow10.9 GPM
Implement flow17.4 GPM
Total hydraulic flow17.4 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
John Deere 5200 Hydraulic Flow Details
| Hydraulic pump flow | 10.9 GPM |
|---|---|
| Implement hydraulic flow | 17.4 GPM |
| Total hydraulic flow | 17.4 GPM |
| Hydraulic system pressure | 2,900 psi |
| Hydraulic system type | open-center |
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
Implement hydraulic flow comparison
Total hydraulic flow comparison
Hydraulic pressure comparison
John Deere 5200 Extra Hydraulic Notes
| Hydraulic flow note | The John Deere 5200’s implement flow figure is about 17.4 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone. |
|---|---|
| Hydraulic pressure note | The John Deere 5200’s hydraulic pressure is listed at 2,900 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force. |
| Rear remotes / SCV note |
|
| Hydraulic system type note | The John Deere 5200 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration. |
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.







