The John Deere 3035D tractor hydraulic pump flow is 57 GPM, and hydraulic system pressure is 2,070 psi.
Hydraulic pump flow57 GPM
Implement flow5.9 GPM
Total hydraulic flow5.9 GPM
Hydraulic pressure2,070 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity34.8 qt (8.7 gal)
John Deere 3035D Hydraulic Flow Details
Hydraulic pump flow
57 GPM
Implement hydraulic flow
5.9 GPM
Total hydraulic flow
5.9 GPM
Hydraulic system pressure
2,070 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
34.8 qt (8.7 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
57 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
5.9 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
5.9 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,070 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
8.7 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 3035D Extra Hydraulic Notes
Hydraulic flow note
With about 5.9 GPM implement flow, the John Deere 3035D sits in the low-flow compact tractor range and is best suited to loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
At 2,070 psi, the John Deere 3035D’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (5.9 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 3035D’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 3035D is 34.8 qt (8.7 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
