The John Deere 3036E tractor hydraulic pump flow is 8.6 GPM, and hydraulic system pressure is 2,495 psi.
Hydraulic pump flow8.6 GPM
Implement flow18.1 L/min (4.8 GPM)
Total hydraulic flow18.1 L/min (4.8 GPM)
Hydraulic pressure2,495 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity22.2 qt (5.5 gal)
John Deere 3036E Hydraulic Flow Details
Hydraulic pump flow
8.6 GPM
Implement hydraulic flow
18.1 L/min (4.8 GPM)
Total hydraulic flow
18.1 L/min (4.8 GPM)
Hydraulic system pressure
2,495 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
22.2 qt (5.5 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
8.6 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
4.8 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
4.8 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,495 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
5.5 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 3036E Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 3036E is 4.8 GPM implement flow; that points toward loader work, steering and simple implements, but not high-demand continuous hydraulic attachments.
Hydraulic pressure note
Hydraulic pressure on the John Deere 3036E is 2,495 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (18.1 L/min (4.8 GPM)), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 3036E: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 3036E is 22.2 qt (5.5 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
