The John Deere 3035D is 111.2 in long and 43.3 in wide, with a 62 in wheelbase.
Length111.2 in (9 ft 3.2 in) / 2,824.5 mm
Width43.3 in (3 ft 7.3 in) / 1,099.8 mm
Wheelbase62 in (5 ft 2 in) / 1,574.8 mm
Ground clearance14 in (1 ft 2 in) / 355.6 mm
John Deere 3035D Dimensions
Overall length
111.2 in (9 ft 3.2 in) / 2,824.5 mm
Overall width
43.3 in (3 ft 7.3 in) / 1,099.8 mm
Wheelbase
62 in (5 ft 2 in) / 1,574.8 mm
Ground clearance
14 in (1 ft 2 in) / 355.6 mm
Rear tread width
43.3 in (3 ft 7.3 in) / 1,099.8 mm
Tractor Size Comparison Chart
Overall length comparison
This model
111.2 in
Average
138.9 in
Low
63 in
High
346.3 in
Overall width comparison
This model
43.3 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
62 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
14 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 3035D Extra Dimension Notes
Size class note
The John Deere 3035D dimension profile makes it a small compact tractor. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Fitment note
The John Deere 3035D gives length at 111.2 in (9 ft 3.2 in) / 2,824.5 mm and width at 43.3 in (3 ft 7.3 in) / 1,099.8 mm. Use those numbers for the shed, trailer and access check.
Wheelbase note
For size comparison, the John Deere 3035D’s 62 in (5 ft 2 in) / 1,574.8 mm wheelbase is a strong reference point.
Ground clearance note
The John Deere 3035D has captured ground clearance of 14 in (1 ft 2 in) / 355.6 mm. More clearance helps in ruts and uneven ground; less clearance can feel more planted.
Tread width note
The captured tread data for the John Deere 3035D gives rear tread only: 43.3 in (3 ft 7.3 in) / 1,099.8 mm.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Use the bare dimensions only as a starting point; a practical storage target is 8 ft wide and 15 ft deep.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Use the 62 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or 43.3 in wide, count it as too tight. The safer check for the John Deere 3035D is around 8 ft wide and 15 ft deep.
What size door should I check?
The clean check is the tractor height plus clearance high, 8 ft wide and 15 ft deep. That gives margin over the listed height not captured height, 43.3 in width and 111.2 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: height not captured for overhead clearance, 43.3 in for side clearance and 111.2 in for bay depth.
How much maneuvering room should I allow?
Use the 62 in wheelbase plus the 111.2 in length together. The tractor may clear the doorway but still need space to swing the front or rear around.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
