The Case IH JX1075N specifications include engine power rated at 75 hp (55.9 kW), a mechanical shuttle transmission and a listed weight of 5,027 to 5,886 lbs.
Case IH JX1075N key specifications
| Engine power | 75 hp (55.9 kW) |
|---|---|
| PTO power | 62 hp (46.2 kW) |
| Displacement | 179 cu in (2.9 L) |
| Transmission | mechanical shuttle |
| Fuel capacity | 15 gal (56.8 L) |
| Weight | 5,027 to 5,886 lbs |
| Rear PTO | independent |
Case IH JX1075N industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power75 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power62 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement2.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity15 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight5,886 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH JX1075N power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH JX1075N dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke | 3.88 × 5.06 inches (99 × 129 mm) |
|---|---|
| Rated RPM | 2,300 |
| Torque | 221 lb-ft (299.7 Nm) |
| Torque RPM | 1,400 |
| Fuel system | mechanical direct injection |
| Starter volts | 12 |
| Emissions | Tier II |
Transmission options
| Gears | 16 forward and reverse |
|---|
PTO and hitch
| Rear hitch category | Category II |
|---|---|
| Hitch control | mechanical lower-link draft sensing |
| Rear lift | 3,962 lbs (1,797 kg) |
| Rear PTO speed | 540 rpm |
Hydraulics
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2,610 psi (180.0 bar) |
| Rear valves | 2 |
| Steering flow | 6.5 gpm (24.6 L/min) |
Mechanical specifications
| Clutch | mechanical dry disc |
|---|
Electrical specifications
| Electrical ground | negative |
|---|---|
| Charging system | alternator |
| ROPS charging amps | 45 |
| Cab charging amps | 65 |
| Battery CCA | 730 |
| Battery volts | 12 |
Dimensions and weight
| Ground clearance | 10.5 inches (26 cm) |
|---|---|
| Maximum front axle load | 3,527 lbs (1,599 kg) |
| Maximum rear axle load | 6,614 lbs (3,000 kg) |
| Hood height | 51 inches (129 cm) |
| ROPS height | 87 inches (220 cm) |
| Cab height | 90.7 inches (230 cm) |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
