The John Deere 2850 tractor hydraulic pump flow is 23 GPM, and hydraulic system pressure is 2,756 psi.
Hydraulic pump flow23 GPM
Implement flow23 GPM
Total hydraulic flow23 GPM
Hydraulic pressure2,756 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity11.6 gal
John Deere 2850 Hydraulic Flow Details
Hydraulic pump flow
23 GPM
Implement hydraulic flow
23 GPM
Total hydraulic flow
23 GPM
Hydraulic system pressure
2,756 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
11.6 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
23 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
23 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
23 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,756 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
11.6 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2850 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 2850 should be matched to implements that fit its 23 GPM hydraulic-flow range.
Hydraulic pressure note
The John Deere 2850’s hydraulic pressure is listed at 2,756 psi, which is strong tractor hydraulic pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (23 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2850’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 2850 is 11.6 gal, but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
