The John Deere 2900 tractor hydraulic pump flow is 20 GPM, and hydraulic system pressure is 2,900 psi.
Hydraulic pump flow20 GPM
Implement flow22.5 GPM
Total hydraulic flow20 GPM
Hydraulic pressure2,900 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity15.8 gal
John Deere 2900 Hydraulic Flow Details
Hydraulic pump flow
20 GPM
Implement hydraulic flow
22.5 GPM
Total hydraulic flow
20 GPM
Hydraulic system pressure
2,900 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
15.8 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
20 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
22.5 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
20 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,900 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
15.8 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2900 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 2900 is 22.5 GPM implement flow; that points toward larger loaders, rear remotes and more demanding implements, depending on pressure and valve setup.
Hydraulic pressure note
At 2,900 psi, the John Deere 2900’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (22.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2900’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
The John Deere 2900’s hydraulic fluid capacity is listed as 15.8 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
