The New Holland TZ24D tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 3.75 gpm | 14.2 lpm, hydraulic pressure is 1885 psi | 130.0 bar, and hydraulic type is open center.
Hydraulic Flow3.75 gpm | 14.2 lpm
Pressure1885 psi | 130.0 bar
Hydraulic Typeopen center
Valves / Remotes1
Lift Capacity1576 lbs | 714 kg
New Holland TZ24D Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
1885 psi | 130.0 bar
Pump flow
3.75 gpm | 14.2 lpm
Rear remotes
1
New Holland TZ24D Hitch, Remote & Lift Specs
Rear hitch type
I
Rear lift at ends
1576 lbs | 714 kg
New Holland TZ24D Useful Hydraulic Calculations
Rear lift per pump gpm
420.3 lb per gpm
Estimated hydraulic horsepower
about 4.1 hydraulic hp from listed pressure and pump flow
Pump flow per listed valve
3.8 gpm per valve
New Holland TZ24D Hydraulic Comparison Charts
Pump flow comparison
This model
3.8 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Hydraulic pressure comparison
This model
1,885 psi
Average
2,300 psi
Low
1,800 psi
High
3,000 psi
Rear lift comparison
This model
1,576 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Valve / remote count comparison
This model
1
Average
1
Low
0
High
3
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TZ24D Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Wet disc brakes
New Holland TZ24D Hydraulic Capacity FAQ
Why is the New Holland TZ24D hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TZ24D, but pump flow is 3.75 gpm | 14.2 lpm, pressure is 1885 psi | 130.0 bar, system type is open center, and lift is listed as 1576 lbs | 714 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TZ24D hydraulics feel fast or slow?
The useful speed clue is 3.75 gpm | 14.2 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TZ24D hydraulic pressure tell you?
The pressure spec is 1885 psi | 130.0 bar, below the 2,300 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland TZ24D?
On the New Holland TZ24D, 3.75 gpm | 14.2 lpm pump flow points to slower loader and cylinder movement, 1,885 psi pressure affects force more than speed, and 1,576 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TZ24D?
For implement matching, the useful checks are 3.8 gpm flow, 1,885 psi pressure, 1,576 lb listed lift, and 1 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TZ24D rear lift capacity strong?
The listed lift figure is 1576 lbs | 714 kg, below the 1,800 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TZ24D hydraulic remotes enough?
The New Holland TZ24D lists 1 for valves/remotes. That is about normal for this category.
Will the New Holland TZ24D hydraulics handle long hydraulic jobs?
The useful heat clues are 3.8 gpm flow, 1,885 psi pressure, and about 4.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TZ24D make on paper?
Using 1,885 psi and 3.8 gpm, the rough pressure-flow estimate is about 4.1 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the New Holland TZ24D hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 1576 lbs | 714 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
