The New Holland T5.130 Dynamic/Auto Command tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 21.1 gpm | 79.9 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is closed center load-sensing.
New Holland T5.130 Dynamic/Auto Command Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load-sensing |
|---|---|
| Hydraulic pressure | 2900 psi | 200.0 bar |
| Pump flow | 21.1 gpm | 79.9 lpm |
| Steering flow | 9.6 gpm | 36.3 lpm |
| Rear remotes | 4 Optional |
New Holland T5.130 Dynamic/Auto Command Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | electronic draft control |
| Rear lift at ends | 12125 lbs | 5499 kg |
| Rear lift at 24 inches | 10228 lbs | 4639 kg |
New Holland T5.130 Dynamic/Auto Command Useful Hydraulic Calculations
| Steering flow vs pump flow | 45.5% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 484.7 lb per gpm |
| Estimated hydraulic horsepower | about 35.7 hydraulic hp from listed pressure and pump flow |
New Holland T5.130 Dynamic/Auto Command Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T5.130 Dynamic/Auto Command Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic front and rear |
New Holland T5.130 Dynamic/Auto Command Hydraulic Capacity FAQ
Why is the New Holland T5.130 Dynamic/Auto Command hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland T5.130 Dynamic/Auto Command, but pump flow is 21.1 gpm | 79.9 lpm, pressure is 2900 psi | 200.0 bar, system type is closed center load-sensing, and lift is listed as 10228 lbs | 4639 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland T5.130 Dynamic/Auto Command hydraulics feel fast or slow?
The useful speed clue is 21.1 gpm | 79.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland T5.130 Dynamic/Auto Command hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland T5.130 Dynamic/Auto Command?
On the New Holland T5.130 Dynamic/Auto Command, 21.1 gpm | 79.9 lpm pump flow points to quicker loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 10,228 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T5.130 Dynamic/Auto Command?
For implement matching, the useful checks are 21.1 gpm flow, 2,900 psi pressure, 10,228 lb listed lift, and 4 Optional remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T5.130 Dynamic/Auto Command rear lift capacity strong?
The listed lift figure is 10228 lbs | 4639 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland T5.130 Dynamic/Auto Command hydraulic remotes enough?
The New Holland T5.130 Dynamic/Auto Command remote/valve listing is 4 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T5.130 Dynamic/Auto Command hydraulics handle long hydraulic jobs?
The useful heat clues are 21.1 gpm flow, 2,900 psi pressure, and about 35.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland T5.130 Dynamic/Auto Command make on paper?
Using 2,900 psi and 21.1 gpm, the rough pressure-flow estimate is about 35.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland T5.130 Dynamic/Auto Command hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic draft control, and listed lift is 10228 lbs | 4639 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
