The Case IH MXU100 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 19.8 gpm | 74.9 lpm, hydraulic pressure is 2974 psi | 205.1 bar, and hydraulic type is pressure-flow compensated Optional (PFC).
Case IH MXU100 Hydraulic Capacity & Flow Specs
| Hydraulic type | pressure-flow compensated Optional (PFC) |
|---|---|
| Hydraulic pressure | 2974 psi | 205.1 bar |
| Pump flow | 19.8 gpm | 74.9 lpm |
| Total hydraulic flow | 30.3 gpm | 114.7 lpm |
| Steering flow | 10.5 gpm | 39.7 lpm |
| Rear remotes | 2 to 4 |
Case IH MXU100 Hitch, Remote & Lift Specs
| Rear hitch type | II (ROPS) |
|---|---|
| Rear hitch control | mechanical lower link (ROPS) |
| Rear lift | 9,285 lbs | 4211 kg |
Case IH MXU100 Useful Hydraulic Calculations
| Total flow vs pump flow | 153% of listed pump flow |
|---|---|
| Steering flow vs pump flow | 53% of listed pump flow |
| Rear lift per pump gpm | 468.9 lb per gpm |
| Estimated hydraulic horsepower | about 34.4 hydraulic hp from listed pressure and pump flow |
Case IH MXU100 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH MXU100 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | hydraulic wet disc brakes |
| Differential lock | electro-hydraulic rear standard front Optional |
Case IH MXU100 Hydraulic Capacity FAQ
Why is the Case IH MXU100 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH MXU100, but pump flow is 19.8 gpm | 74.9 lpm, pressure is 2974 psi | 205.1 bar, system type is pressure-flow compensated Optional (PFC), and lift is listed as 9,285 lbs | 4211 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH MXU100 hydraulics feel fast or slow?
The useful speed clue is 19.8 gpm | 74.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH MXU100 hydraulic pressure tell you?
The pressure spec is 2974 psi | 205.1 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Case IH MXU100?
On the Case IH MXU100, 19.8 gpm | 74.9 lpm pump flow points to quicker loader and cylinder movement, 2,974 psi pressure affects force more than speed, and 9,285 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH MXU100?
For implement matching, the useful checks are 19.8 gpm flow, 2,974 psi pressure, 9,285 lb listed lift, and 2 to 4 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, strong on hydraulic force if the cylinders and relief settings match, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH MXU100 rear lift capacity strong?
The listed lift figure is 9,285 lbs | 4211 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH MXU100 hydraulic remotes enough?
The Case IH MXU100 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH MXU100 hydraulics handle long hydraulic jobs?
The useful heat clues are 19.8 gpm flow, 2,974 psi pressure, and about 34.4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH MXU100 make on paper?
Using 2,974 psi and 19.8 gpm, the rough pressure-flow estimate is about 34.4 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH MXU100 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II (ROPS), hitch control is mechanical lower link (ROPS), and listed lift is 9,285 lbs | 4211 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
