The New Holland TS100 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9.7 gpm | 36.7 lpm, hydraulic pressure is 2500 psi | 172.4 bar, and hydraulic type is open center.
New Holland TS100 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2500 psi | 172.4 bar |
| Pump flow | 9.7 gpm | 36.7 lpm |
| Steering flow | 9.5 gpm | 36.0 lpm |
| Hydraulic valves | 2 to 4 |
New Holland TS100 Hitch, Remote & Lift Specs
| Rear hitch type | II/IIN |
|---|---|
| Rear lift at 24 inches | 4200 lbs | 1905 kg |
New Holland TS100 Useful Hydraulic Calculations
| Steering flow vs pump flow | 97.9% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 433 lb per gpm |
| Estimated hydraulic horsepower | about 14.1 hydraulic hp from listed pressure and pump flow |
New Holland TS100 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TS100 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
| Differential lock | mechanical rear |
New Holland TS100 Hydraulic Capacity FAQ
Why is the New Holland TS100 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TS100, but pump flow is 9.7 gpm | 36.7 lpm, pressure is 2500 psi | 172.4 bar, system type is open center, and lift is listed as 4200 lbs | 1905 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TS100 hydraulics feel fast or slow?
The useful speed clue is 9.7 gpm | 36.7 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TS100 hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TS100?
On the New Holland TS100, 9.7 gpm | 36.7 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 4,200 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TS100?
For implement matching, the useful checks are 9.7 gpm flow, 2,500 psi pressure, 4,200 lb listed lift, and 2 to 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TS100 rear lift capacity strong?
The listed lift figure is 4200 lbs | 1905 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TS100 hydraulic remotes enough?
The New Holland TS100 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TS100 hydraulics handle long hydraulic jobs?
The useful heat clues are 9.7 gpm flow, 2,500 psi pressure, and about 14.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TS100 make on paper?
Using 2,500 psi and 9.7 gpm, the rough pressure-flow estimate is about 14.1 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the New Holland TS100 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/IIN and listed lift is 4200 lbs | 1905 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
