The New Holland TS115 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pressure is 2500 psi | 172.4 bar, hydraulic type is open center, and valves/remotes are listed as 2 to 4.
New Holland TS115 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2500 psi | 172.4 bar |
| Optional pump flow | 9.3 gpm | 35.2 lpm | 17.4 gpm (Optional pump) | 65.9 lpm |
| Hydraulic valves | 2 to 4 |
New Holland TS115 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear lift at 24 inches | 4200 lbs | 1905 kg |
New Holland TS115 Hydraulic Comparison Charts
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TS115 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
New Holland TS115 Hydraulic Capacity FAQ
Why is the New Holland TS115 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TS115, but pressure is 2500 psi | 172.4 bar, system type is open center, and lift is listed as 4200 lbs | 1905 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
What does the New Holland TS115 hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TS115?
On the New Holland TS115, pump/remote flow is not listed here, so loader speed cannot be judged from this page alone, 2,500 psi pressure affects force more than speed, and 4,200 lb listed lift is the number to watch for implement weight. You need the pump-flow or remote-flow spec to judge speed; pressure and lift only tell you force/capacity.
How do you judge hydraulic implement fit on the New Holland TS115?
For implement matching, the useful checks are 2,500 psi pressure, 4,200 lb listed lift, 2 to 4 remote/valve listing, and II hitch. That combination is normal on pressure for the class and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TS115 rear lift capacity strong?
The listed lift figure is 4200 lbs | 1905 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TS115 hydraulic remotes enough?
The New Holland TS115 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
What do the New Holland TS115 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 4200 lbs | 1905 kg. Hitch category gets the implement connected and lift capacity gets it raised; pump flow still needs checking separately if cylinder speed matters.
What hydraulic system does the New Holland TS115 use?
The hydraulic system is listed as open center and 2500 psi | 172.4 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TS115 hydraulics?
For service planning, the system is listed as open center and pressure is listed at 2,500 psi. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
