The New Holland TM165 tractor hydraulic capacity is 26.5 gal | 100.3 L, pump flow is 28 gpm | 106.0 lpm, and hydraulic pressure is 2750 psi | 189.6 bar.
New Holland TM165 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed-center load sensing (CCLS) |
|---|---|
| Hydraulic capacity | 26.5 gal | 100.3 L |
| Hydraulic pressure | 2750 psi | 189.6 bar |
| Pump flow | 28 gpm | 106.0 lpm |
| Steering flow | 16.4 gpm | 62.1 lpm |
| Rear remotes | 4 (max) |
New Holland TM165 Hitch, Remote & Lift Specs
| Rear hitch type | III/II |
|---|---|
| Rear hitch control | electronic lower-link draft sensing |
| Rear lift | 11690 lbs | 5302 kg |
| Front lift | 7208 lbs | 3269 kg |
New Holland TM165 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.1 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.9 minutes at rated pump flow |
| Steering flow vs pump flow | 58.6% of listed pump flow |
| Rear lift per pump gpm | 417.5 lb per gpm |
| Rear lift per hydraulic gallon | 441.1 lb per gal |
| Estimated hydraulic horsepower | about 44.9 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 7 gpm per valve |
| Metric capacity vs pump flow | 100.3 L capacity with 28 gpm pump flow |
New Holland TM165 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TM165 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
New Holland TM165 Hydraulic Capacity FAQ
Is the New Holland TM165 hydraulic capacity big or small for its size?
The New Holland TM165 lists 26.5 gal | 100.3 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland TM165 hydraulics feel fast or slow?
The useful speed clue is 28 gpm | 106.0 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TM165 hydraulic pressure tell you?
The pressure spec is 2750 psi | 189.6 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland TM165?
On the New Holland TM165, 28 gpm | 106.0 lpm pump flow points to slower loader and cylinder movement, 2,750 psi pressure affects force more than speed, and 11,690 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TM165?
For implement matching, the useful checks are 28 gpm flow, 2,750 psi pressure, 11,690 lb listed lift, and 4 (max) remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TM165 rear lift capacity strong?
The listed lift figure is 11690 lbs | 5302 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TM165 hydraulic remotes enough?
The New Holland TM165 lists 4 (max) for valves/remotes. That is slightly under the 5 benchmark, but still a workable/normal remote count for many setups.
Will the New Holland TM165 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.5 gal of hydraulic capacity, 28 gpm flow, 2,750 psi pressure, and about 44.9 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the New Holland TM165 make on paper?
Using 2,750 psi and 28 gpm, the rough pressure-flow estimate is about 44.9 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TM165 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/II, hitch control is electronic lower-link draft sensing, and listed lift is 11690 lbs | 5302 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
