The New Holland TM125 tractor hydraulic capacity is 23.75 gal | 89.9 L, pump flow is 28 gpm | 106.0 lpm, and hydraulic pressure is 2750 psi | 189.6 bar.
New Holland TM125 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed-center load sensing (CCLS) |
|---|---|
| Hydraulic capacity | 23.75 gal | 89.9 L |
| Hydraulic pressure | 2750 psi | 189.6 bar |
| Pump flow | 28 gpm | 106.0 lpm |
| Steering flow | 15.5 gpm | 58.7 lpm |
| Rear remotes | 4 (max) |
New Holland TM125 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | electronic lower-link draft sensing |
| Rear lift | 8725 lbs | 3957 kg |
| Front lift | 7208 lbs | 3269 kg |
New Holland TM125 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.2 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.8 minutes at rated pump flow |
| Steering flow vs pump flow | 55.4% of listed pump flow |
| Rear lift per pump gpm | 311.6 lb per gpm |
| Rear lift per hydraulic gallon | 367.4 lb per gal |
| Estimated hydraulic horsepower | about 44.9 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 7 gpm per valve |
| Metric capacity vs pump flow | 89.9 L capacity with 28 gpm pump flow |
New Holland TM125 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TM125 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
New Holland TM125 Hydraulic Capacity FAQ
Is the New Holland TM125 hydraulic capacity big or small for its size?
The New Holland TM125 lists 23.75 gal | 89.9 L of hydraulic capacity, above the 18 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the New Holland TM125 hydraulics feel fast or slow?
The useful speed clue is 28 gpm | 106.0 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland TM125 hydraulic pressure tell you?
The pressure spec is 2750 psi | 189.6 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TM125?
On the New Holland TM125, 28 gpm | 106.0 lpm pump flow points to quicker loader and cylinder movement, 2,750 psi pressure affects force more than speed, and 8,725 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TM125?
For implement matching, the useful checks are 28 gpm flow, 2,750 psi pressure, 8,725 lb listed lift, and 4 (max) remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TM125 rear lift capacity strong?
The listed lift figure is 8725 lbs | 3957 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland TM125 hydraulic remotes enough?
The New Holland TM125 lists 4 (max) for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the New Holland TM125 hydraulics handle long hydraulic jobs?
The useful heat clues are 23.8 gal of hydraulic capacity, 28 gpm flow, 2,750 psi pressure, and about 44.9 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the New Holland TM125 make on paper?
Using 2,750 psi and 28 gpm, the rough pressure-flow estimate is about 44.9 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TM125 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic lower-link draft sensing, and listed lift is 8725 lbs | 3957 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
