The Case IH MXM120 Maxxum tractor hydraulic capacity is 23.75 gal | 89.9 L, pump flow is 28 gpm | 106.0 lpm, and hydraulic pressure is 2750 psi | 189.6 bar.
Hydraulic Capacity23.75 gal | 89.9 L
Hydraulic Flow28 gpm | 106.0 lpm
Pressure2750 psi | 189.6 bar
Hydraulic Typeclosed-center load sensing
Valves / Remotes2 to 5
Lift Capacity8,725 lbs | 3957 kg
Case IH MXM120 Maxxum Hydraulic Capacity & Flow Specs
Hydraulic type
closed-center load sensing
Hydraulic capacity
23.75 gal | 89.9 L
Hydraulic pressure
2750 psi | 189.6 bar
Pump flow
28 gpm | 106.0 lpm
Total hydraulic flow
44 gpm | 166.5 lpm
Steering flow
16 gpm | 60.6 lpm
SCV flow
25 gpm | 94.6 lpm
Hydraulic valves
2 to 5
Case IH MXM120 Maxxum Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
electronic lower-link sensing
Rear lift at 24 inches
8,725 lbs | 3957 kg
Case IH MXM120 Maxxum Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1.2 gpm per gal
Hydraulic tank turnover estimate
about 0.8 minutes at rated pump flow
Total flow vs pump flow
157.1% of listed pump flow
SCV flow vs pump flow
89.3% of listed pump flow
Steering flow vs pump flow
57.1% of listed pump flow
Rear lift per pump gpm
311.6 lb per gpm
Rear lift per hydraulic gallon
367.4 lb per gal
Estimated hydraulic horsepower
about 44.9 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
89.9 L capacity with 28 gpm pump flow
Case IH MXM120 Maxxum Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
23.8 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
28 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,750 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
8,725 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH MXM120 Maxxum Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
hydraulic wet disc brakes
Case IH MXM120 Maxxum Hydraulic Capacity FAQ
Is the Case IH MXM120 Maxxum hydraulic capacity big or small for its size?
The Case IH MXM120 Maxxum lists 23.75 gal | 89.9 L of hydraulic capacity, above the 18 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Case IH MXM120 Maxxum hydraulics feel fast or slow?
The useful speed clue is 28 gpm | 106.0 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH MXM120 Maxxum hydraulic pressure tell you?
The pressure spec is 2750 psi | 189.6 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH MXM120 Maxxum?
On the Case IH MXM120 Maxxum, 28 gpm | 106.0 lpm pump flow points to quicker loader and cylinder movement, 2,750 psi pressure affects force more than speed, and 8,725 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH MXM120 Maxxum?
For implement matching, the useful checks are 28 gpm flow, 2,750 psi pressure, 8,725 lb listed lift, and 2 to 5 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH MXM120 Maxxum rear lift capacity strong?
The listed lift figure is 8,725 lbs | 3957 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH MXM120 Maxxum hydraulic remotes enough?
The Case IH MXM120 Maxxum remote/valve listing is 2 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH MXM120 Maxxum hydraulics handle long hydraulic jobs?
The useful heat clues are 23.8 gal of hydraulic capacity, 28 gpm flow, 2,750 psi pressure, and about 44.9 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Case IH MXM120 Maxxum make on paper?
Using 2,750 psi and 28 gpm, the rough pressure-flow estimate is about 44.9 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH MXM120 Maxxum hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic lower-link sensing, and listed lift is 8,725 lbs | 3957 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
