The New Holland TK80 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.9 gpm | 45.0 lpm, hydraulic pressure is 2755 psi | 190.0 bar, and hydraulic type is open center.
Hydraulic Flow11.9 gpm | 45.0 lpm
Pressure2755 psi | 190.0 bar
Hydraulic Typeopen center
Valves / Remotes3
Lift Capacity4075 lbs | 1848 kg
New Holland TK80 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
2755 psi | 190.0 bar
Pump flow
11.9 gpm | 45.0 lpm
Steering flow
5 gpm | 18.9 lpm
Hydraulic valves
3
New Holland TK80 Hitch, Remote & Lift Specs
Rear hitch type
II/I
Rear lift
4075 lbs | 1848 kg
New Holland TK80 Useful Hydraulic Calculations
Steering flow vs pump flow
42% of listed pump flow
Rear lift per pump gpm
342.4 lb per gpm
Estimated hydraulic horsepower
about 19.1 hydraulic hp from listed pressure and pump flow
Pump flow per listed valve
4 gpm per valve
New Holland TK80 Hydraulic Comparison Charts
Pump flow comparison
This model
11.9 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,755 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
4,075 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Valve / remote count comparison
This model
3
Average
2
Low
1
High
4
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TK80 Hydraulic Capacity FAQ
Why is the New Holland TK80 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TK80, but pump flow is 11.9 gpm | 45.0 lpm, pressure is 2755 psi | 190.0 bar, system type is open center, and lift is listed as 4075 lbs | 1848 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TK80 hydraulics feel fast or slow?
The useful speed clue is 11.9 gpm | 45.0 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TK80 hydraulic pressure tell you?
The pressure spec is 2755 psi | 190.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland TK80?
On the New Holland TK80, 11.9 gpm | 45.0 lpm pump flow points to slower loader and cylinder movement, 2,755 psi pressure affects force more than speed, and 4,075 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TK80?
For implement matching, the useful checks are 11.9 gpm flow, 2,755 psi pressure, 4,075 lb listed lift, and 3 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TK80 rear lift capacity strong?
The listed lift figure is 4075 lbs | 1848 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland TK80 hydraulic remotes enough?
The New Holland TK80 lists 3 for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the New Holland TK80 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.9 gpm flow, 2,755 psi pressure, and about 19.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TK80 make on paper?
Using 2,755 psi and 11.9 gpm, the rough pressure-flow estimate is about 19.1 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the New Holland TK80 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I and listed lift is 4075 lbs | 1848 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
