The New Holland T6050 Plus tractor hydraulic capacity is 16.3 gal | 61.7 L, pump flow is 26.5 gpm | 100.3 lpm, and hydraulic type is closed center load-sensing.
Hydraulic Capacity16.3 gal | 61.7 L
Hydraulic Flow26.5 gpm | 100.3 lpm
Hydraulic Typeclosed center load-sensing
Valves / Remotes2 to 4
Lift Capacity9285 lbs | 4211 kg | 9620 lbs (Optional) | 4363 kg
New Holland T6050 Plus Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load-sensing
Hydraulic capacity
16.3 gal | 61.7 L
Pump flow
26.5 gpm | 100.3 lpm
Total hydraulic flow
37 gpm | 140.0 lpm
Steering flow
10.5 gpm | 39.7 lpm
Hydraulic valves
2 to 4
New Holland T6050 Plus Hitch, Remote & Lift Specs
Rear hitch type
II (mech)
Rear hitch control
mechanical lower link draft sensing, electronic Optional
Rear lift
9285 lbs | 4211 kg | 9620 lbs (Optional) | 4363 kg
New Holland T6050 Plus Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1.6 gpm per gal
Hydraulic tank turnover estimate
about 0.6 minutes at rated pump flow
Total flow vs pump flow
139.6% of listed pump flow
Steering flow vs pump flow
39.6% of listed pump flow
Rear lift per pump gpm
350.4 lb per gpm
Rear lift per hydraulic gallon
569.6 lb per gal
Metric capacity vs pump flow
61.7 L capacity with 26.5 gpm pump flow
New Holland T6050 Plus Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
16.3 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
26.5 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
9,285 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T6050 Plus Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power SuperSteer Optional
Brakes
Hydraulic wet disc brakes
New Holland T6050 Plus Hydraulic Capacity FAQ
Is the New Holland T6050 Plus hydraulic capacity big or small for its size?
The New Holland T6050 Plus lists 16.3 gal | 61.7 L of hydraulic capacity, which is close to the 18 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the New Holland T6050 Plus hydraulics feel fast or slow?
The useful speed clue is 26.5 gpm | 100.3 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the New Holland T6050 Plus?
On the New Holland T6050 Plus, 26.5 gpm | 100.3 lpm pump flow points to quicker loader and cylinder movement and 9,285 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T6050 Plus?
For implement matching, the useful checks are 26.5 gpm flow, 9,285 lb listed lift, 2 to 4 remote/valve listing, and II (mech) hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T6050 Plus rear lift capacity strong?
The listed lift figure is 9285 lbs | 4211 kg | 9620 lbs (Optional) | 4363 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland T6050 Plus hydraulic remotes enough?
The New Holland T6050 Plus remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T6050 Plus hydraulics handle long hydraulic jobs?
The useful heat clues are 16.3 gal of hydraulic capacity and 26.5 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the New Holland T6050 Plus hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II (mech), hitch control is mechanical lower link draft sensing, electronic Optional, and listed lift is 9285 lbs | 4211 kg | 9620 lbs (Optional) | 4363 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland T6050 Plus use?
The hydraulic system is listed as closed center load-sensing with 26.5 gpm | 100.3 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T6050 Plus hydraulics?
For service planning, the oil-volume figure is 16.3 gal | 61.7 L, the system is listed as closed center load-sensing, and flow is listed at 26.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
