The Case IH Maxxum 120 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 26.5 gpm | 100.3 lpm, hydraulic type is closed center PFC, and valves/remotes are listed as 2 to 4.
Hydraulic Flow26.5 gpm | 100.3 lpm
Hydraulic Typeclosed center PFC
Valves / Remotes2 to 4
Lift Capacity9,620 lbs | 4363 kg
Case IH Maxxum 120 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center PFC
Pump flow
26.5 gpm | 100.3 lpm
Total hydraulic flow
37 gpm | 140.0 lpm
Steering flow
10.5 gpm | 39.7 lpm
Hydraulic valves
2 to 4
Case IH Maxxum 120 Hitch, Remote & Lift Specs
Rear hitch type
2/3N
Rear hitch control
electronic draft control
Rear lift
9,620 lbs | 4363 kg
Front lift
8157 lbs | 3700 kg
Case IH Maxxum 120 Useful Hydraulic Calculations
Total flow vs pump flow
139.6% of listed pump flow
Steering flow vs pump flow
39.6% of listed pump flow
Rear lift per pump gpm
363 lb per gpm
Case IH Maxxum 120 Hydraulic Comparison Charts
Pump flow comparison
This model
26.5 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
9,620 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Maxxum 120 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Trailer brakes
hydraulic Optional
Case IH Maxxum 120 Hydraulic Capacity FAQ
Why is the Case IH Maxxum 120 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Maxxum 120, but pump flow is 26.5 gpm | 100.3 lpm, system type is closed center PFC, and lift is listed as 9,620 lbs | 4363 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Maxxum 120 hydraulics feel fast or slow?
The useful speed clue is 26.5 gpm | 100.3 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Maxxum 120?
On the Case IH Maxxum 120, 26.5 gpm | 100.3 lpm pump flow points to quicker loader and cylinder movement and 9,620 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Maxxum 120?
For implement matching, the useful checks are 26.5 gpm flow, 9,620 lb listed lift, 2 to 4 remote/valve listing, and 2/3N hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Maxxum 120 rear lift capacity strong?
The listed lift figure is 9,620 lbs | 4363 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Maxxum 120 hydraulic remotes enough?
The Case IH Maxxum 120 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Maxxum 120 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.5 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Maxxum 120 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2/3N, hitch control is electronic draft control, and listed lift is 9,620 lbs | 4363 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Maxxum 120 use?
The hydraulic system is listed as closed center PFC with 26.5 gpm | 100.3 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Maxxum 120 hydraulics?
For service planning, the system is listed as closed center PFC and flow is listed at 26.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
