The New Holland 8360 tractor hydraulic capacity is 23.7 gal (18-speed) | 89.7 L, pump flow is 26 gpm | 98.4 lpm, and hydraulic pressure is 2755 psi | 190.0 bar.
Hydraulic Capacity23.7 gal (18-speed) | 89.7 L
Hydraulic Flow26 gpm | 98.4 lpm
Pressure2755 psi | 190.0 bar
Hydraulic Typeclosed center load sensing
Valves / Remotes2 to 4
Lift Capacity12,000 lbs | 5443 kg
New Holland 8360 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load sensing
Hydraulic capacity
23.7 gal (18-speed) | 89.7 L
Hydraulic pressure
2755 psi | 190.0 bar
Pump flow
26 gpm | 98.4 lpm
Steering flow
16.4 gpm | 62.1 lpm
Hydraulic valves
2 to 4
New Holland 8360 Hitch, Remote & Lift Specs
Rear hitch type
II/III
Rear lift at 24 inches
12,000 lbs | 5443 kg
New Holland 8360 Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1.1 gpm per gal
Hydraulic tank turnover estimate
about 0.9 minutes at rated pump flow
Steering flow vs pump flow
63.1% of listed pump flow
Rear lift per pump gpm
461.5 lb per gpm
Rear lift per hydraulic gallon
506.3 lb per gal
Estimated hydraulic horsepower
about 41.8 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
89.7 L capacity with 26 gpm pump flow
New Holland 8360 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
23.7 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
26 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,755 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
12,000 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 8360 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
hydraulic wet disc brakes
Differential lock
Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD)
New Holland 8360 Hydraulic Capacity FAQ
Is the New Holland 8360 hydraulic capacity big or small for its size?
The New Holland 8360 lists 23.7 gal (18-speed) | 89.7 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland 8360 hydraulics feel fast or slow?
The useful speed clue is 26 gpm | 98.4 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland 8360 hydraulic pressure tell you?
The pressure spec is 2755 psi | 190.0 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland 8360?
On the New Holland 8360, 26 gpm | 98.4 lpm pump flow points to slower loader and cylinder movement, 2,755 psi pressure affects force more than speed, and 12,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 8360?
For implement matching, the useful checks are 26 gpm flow, 2,755 psi pressure, 12,000 lb listed lift, and 2 to 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 8360 rear lift capacity strong?
The listed lift figure is 12,000 lbs | 5443 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland 8360 hydraulic remotes enough?
The New Holland 8360 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland 8360 hydraulics handle long hydraulic jobs?
The useful heat clues are 23.7 gal of hydraulic capacity, 26 gpm flow, 2,755 psi pressure, and about 41.8 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the New Holland 8360 make on paper?
Using 2,755 psi and 26 gpm, the rough pressure-flow estimate is about 41.8 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland 8360 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/III and listed lift is 12,000 lbs | 5443 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
