The New Holland 5610S tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9.7 gpm | 36.7 lpm, hydraulic pressure is 2500 psi | 172.4 bar, and hydraulic type is gear pump.
New Holland 5610S Hydraulic Capacity & Flow Specs
| Hydraulic type | gear pump |
|---|---|
| Hydraulic pressure | 2500 psi | 172.4 bar |
| Pump flow | 9.7 gpm | 36.7 lpm |
| Steering flow | 9.6 gpm | 36.3 lpm |
| Hydraulic valves | 2 |
New Holland 5610S Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | position control with top-link draft sensing |
| Rear lift | 4040 lbs | 1832 kg |
New Holland 5610S Useful Hydraulic Calculations
| Steering flow vs pump flow | 99% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 416.5 lb per gpm |
| Estimated hydraulic horsepower | about 14.1 hydraulic hp from listed pressure and pump flow |
| Pump flow per listed valve | 4.8 gpm per valve |
New Holland 5610S Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Valve / remote count comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 5610S Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Wet disc brakes |
New Holland 5610S Hydraulic Capacity FAQ
Why is the New Holland 5610S hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland 5610S, but pump flow is 9.7 gpm | 36.7 lpm, pressure is 2500 psi | 172.4 bar, system type is gear pump, and lift is listed as 4040 lbs | 1832 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland 5610S hydraulics feel fast or slow?
The useful speed clue is 9.7 gpm | 36.7 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland 5610S hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland 5610S?
On the New Holland 5610S, 9.7 gpm | 36.7 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 4,040 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 5610S?
For implement matching, the useful checks are 9.7 gpm flow, 2,500 psi pressure, 4,040 lb listed lift, and 2 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 5610S rear lift capacity strong?
The listed lift figure is 4040 lbs | 1832 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland 5610S hydraulic remotes enough?
The New Holland 5610S lists 2 for valves/remotes. That is about normal for this category.
Will the New Holland 5610S hydraulics handle long hydraulic jobs?
The useful heat clues are 9.7 gpm flow, 2,500 psi pressure, and about 14.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland 5610S make on paper?
Using 2,500 psi and 9.7 gpm, the rough pressure-flow estimate is about 14.1 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the New Holland 5610S hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is position control with top-link draft sensing, and listed lift is 4040 lbs | 1832 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
