The New Holland 5610 tractor hydraulic capacity is 15 gal | 56.8 L, pump flow is 9.7 gpm (Series I) | 36.7 lpm, and hydraulic pressure is 2500 psi | 172.4 bar.
Hydraulic Capacity15 gal | 56.8 L
Hydraulic Flow9.7 gpm (Series I) | 36.7 lpm
Pressure2500 psi | 172.4 bar
Hydraulic Typeopen center
Valves / Remotes1
Lift Capacity3120 lbs (Series I) | 1415 kg
New Holland 5610 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic capacity
15 gal | 56.8 L
Hydraulic pressure
2500 psi | 172.4 bar
Pump flow
9.7 gpm (Series I) | 36.7 lpm
Steering flow
3.6 gpm | 13.6 lpm
Hydraulic valves
1
New Holland 5610 Hitch, Remote & Lift Specs
Rear hitch type
II/I
Rear hitch control
position and top-link draft control
Rear lift at 24 inches
3120 lbs (Series I) | 1415 kg
New Holland 5610 Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
0.6 gpm per gal
Hydraulic tank turnover estimate
about 1.5 minutes at rated pump flow
Steering flow vs pump flow
37.1% of listed pump flow
Rear lift per pump gpm
321.6 lb per gpm
Rear lift per hydraulic gallon
208 lb per gal
Estimated hydraulic horsepower
about 14.1 hydraulic hp from listed pressure and pump flow
Pump flow per listed valve
9.7 gpm per valve
Metric capacity vs pump flow
56.8 L capacity with 9.7 gpm pump flow
New Holland 5610 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
15 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
9.7 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,500 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
3,120 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Valve / remote count comparison
This model
1
Average
2
Low
1
High
4
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 5610 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
mechanical wet disc brakes
Differential lock
mechanical rear
New Holland 5610 Hydraulic Capacity FAQ
Is the New Holland 5610 hydraulic capacity big or small for its size?
The New Holland 5610 lists 15 gal | 56.8 L of hydraulic capacity, which is below the 18 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland 5610 hydraulics feel fast or slow?
The useful speed clue is 9.7 gpm (Series I) | 36.7 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland 5610 hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland 5610?
On the New Holland 5610, 9.7 gpm (Series I) | 36.7 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 3,120 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 5610?
For implement matching, the useful checks are 9.7 gpm flow, 2,500 psi pressure, 3,120 lb listed lift, and 1 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 5610 rear lift capacity strong?
The listed lift figure is 3120 lbs (Series I) | 1415 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland 5610 hydraulic remotes enough?
The New Holland 5610 lists 1 for valves/remotes. That is on the limited side, so hydraulic top links, loaders, blades or implements with extra functions may need more plumbing.
Will the New Holland 5610 hydraulics handle long hydraulic jobs?
The useful heat clues are 15 gal of hydraulic capacity, 9.7 gpm flow, 2,500 psi pressure, and about 14.1 hydraulic hp by the pressure-flow estimate. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
How much hydraulic power does the New Holland 5610 make on paper?
Using 2,500 psi and 9.7 gpm, the rough pressure-flow estimate is about 14.1 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the New Holland 5610 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position and top-link draft control, and listed lift is 3120 lbs (Series I) | 1415 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
