Massey Ferguson 475 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Massey Ferguson 475 Horsepower Comparison Charts
Engine horsepower comparison
This model
130 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
110.3 hp
Average
175 hp
Low
100 hp
High
320 hp
Displacement comparison
This model
365.3 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
376.2 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3.3 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 475 Horsepower FAQ
How much horsepower does the Massey Ferguson 475 have?
The listed engine output is 130 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 130 hp.
How much PTO horsepower does the Massey Ferguson 475 have?
The listed PTO output is 110.3 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 110.3 hp rather than using a bigger engine-horsepower number.
How much engine power reaches the PTO on the Massey Ferguson 475?
The PTO-to-engine transfer works out to 84.8%, from 130 engine hp to 110.3 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 475 engine?
The engine displacement is 365.3 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 475 engine stressed for its PTO horsepower?
The engine has about 3.3 cubic inches per PTO hp, using 365.3 ci and 110.3 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Massey Ferguson 475 make?
The output density is about 18.4 PTO hp per liter, using 110.3 PTO hp and 6 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 475 have?
The listed torque is 376.2 lb-ft, below the 700 lb-ft benchmark average. With 376.2 lb-ft listed, gearing matters more when the tractor is loaded hard.
Does the Massey Ferguson 475 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.4 lb-ft per PTO hp, using 376.2 lb-ft and 110.3 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 475 rated at?
The rated speed is 2,200 rpm, close to the 2,100 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
