The Massey Ferguson 130 tractor engine horsepower is 30 hp | 22.4 kW, PTO horsepower is 27 hp | 20.1 kW, and the drawbar horsepower is 23 hp | 17.2 kW.
Massey Ferguson 130 Fuel, Cooling, Starting & Service Specs
Fuel capacity
12 gal | 45.4 L
Starter volts
12
Massey Ferguson 130 Horsepower Comparison Charts
Engine horsepower comparison
This model
30 hp
Average
35 hp
Low
15 hp
High
60 hp
PTO horsepower comparison
This model
27 hp
Average
28 hp
Low
12 hp
High
50 hp
Drawbar horsepower comparison
This model
23 hp
Average
24 hp
Low
10 hp
High
45 hp
Displacement comparison
This model
107 ci
Average
110 ci
Low
50 ci
High
180 ci
Torque comparison
This model
76 lb-ft
Average
95 lb-ft
Low
45 lb-ft
High
170 lb-ft
Rated RPM comparison
This model
2,250 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Engine size per PTO HP
This model
4 ci/hp
Average
3.1 ci/hp
Low
1.8 ci/hp
High
5 ci/hp
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 130 Horsepower FAQ
How much horsepower does the Massey Ferguson 130 have?
The listed engine output is 30 hp, below the 35 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 30 hp.
How much PTO horsepower does the Massey Ferguson 130 have?
The listed PTO output is 27 hp, close to the 28 hp benchmark average. Use 27 PTO hp as the practical implement-sizing number.
How much drawbar horsepower does the Massey Ferguson 130 have?
The listed drawbar output is 23 hp, close to the 24 hp benchmark average. It gives a realistic pulling-power figure of about 23 hp.
How much engine power reaches the PTO on the Massey Ferguson 130?
The PTO-to-engine transfer works out to 90%, from 30 engine hp to 27 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 130 for pulling work?
The drawbar-to-engine transfer is about 76.7%, from 30 engine hp to 23 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Massey Ferguson 130 better judged by PTO hp or drawbar hp?
The drawbar output is about 85.2% of PTO output, comparing 23 drawbar hp with 27 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 130 engine?
The engine displacement is 107 ci, close to the 110 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 130 engine stressed for its PTO horsepower?
The engine has about 4 cubic inches per PTO hp, using 107 ci and 27 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 130 make?
The output density is about 15 PTO hp per liter, using 27 PTO hp and 1.8 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
