The Massey Ferguson 3325 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.6 gpm | 43.9 lpm, hydraulic pressure is 2611 psi | 180.0 bar, and hydraulic type is open center.
about 17.7 hydraulic hp from listed pressure and pump flow
Massey Ferguson 3325 Hydraulic Comparison Charts
Pump flow comparison
This model
11.6 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,611 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
5,732 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 3325 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 3325, but pump flow is 11.6 gpm | 43.9 lpm, pressure is 2611 psi | 180.0 bar, system type is open center, and lift is listed as 5732 lbs | 2600 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 3325 hydraulics feel fast or slow?
The useful speed clue is 11.6 gpm | 43.9 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 3325 hydraulic pressure tell you?
The pressure spec is 2611 psi | 180.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 3325?
On the Massey Ferguson 3325, 11.6 gpm | 43.9 lpm pump flow points to slower loader and cylinder movement, 2,611 psi pressure affects force more than speed, and 5,732 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 3325?
For implement matching, the useful checks are 11.6 gpm flow, 2,611 psi pressure, 5,732 lb listed lift, and 2 or 3 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 3325 rear lift capacity strong?
The listed lift figure is 5732 lbs | 2600 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 3325 hydraulic remotes enough?
The Massey Ferguson 3325 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 3325 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.6 gpm flow, 2,611 psi pressure, and about 17.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 3325 make on paper?
Using 2,611 psi and 11.6 gpm, the rough pressure-flow estimate is about 17.7 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 3325 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position and draft control, and listed lift is 5732 lbs | 2600 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
