The Massey Ferguson 3115 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 13.21 gpm | 50.0 lpm, and hydraulic pressure is 2610 psi | 180.0 bar.
about 20.1 hydraulic hp from listed pressure and pump flow
Massey Ferguson 3115 Hydraulic Comparison Charts
Pump flow comparison
This model
13.2 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,610 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
14,330 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 3115 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 3115, but pump flow is 13.21 gpm | 50.0 lpm, pressure is 2610 psi | 180.0 bar, and lift is listed as 14330 lbs | 6500 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 3115 hydraulics feel fast or slow?
The useful speed clue is 13.21 gpm | 50.0 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 3115 hydraulic pressure tell you?
The pressure spec is 2610 psi | 180.0 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Massey Ferguson 3115?
On the Massey Ferguson 3115, 13.21 gpm | 50.0 lpm pump flow points to slower loader and cylinder movement, 2,610 psi pressure affects force more than speed, and 14,330 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 3115?
For implement matching, the useful checks are 13.2 gpm flow, 2,610 psi pressure, 14,330 lb listed lift, and II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and not a brute-force hydraulic setup compared with higher-pressure systems, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 3115 rear lift capacity strong?
The listed lift figure is 14330 lbs | 6500 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Will the Massey Ferguson 3115 hydraulics handle long hydraulic jobs?
The useful heat clues are 13.2 gpm flow, 2,610 psi pressure, and about 20.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 3115 make on paper?
Using 2,610 psi and 13.2 gpm, the rough pressure-flow estimate is about 20.1 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 3115 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 14330 lbs | 6500 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Massey Ferguson 3115 hydraulics?
For service planning, pressure is listed at 2,610 psi and flow is listed at 13.2 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
