The Massey Ferguson 3445 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 6.6 gpm | 25.0 lpm, hydraulic pressure is 2610 psi | 180.0 bar, and valves/remotes are listed as 2 to 3 rear | 2 to 3 rear 2 mid Optional.
Hydraulic Flow6.6 gpm | 25.0 lpm
Pressure2610 psi | 180.0 bar
Valves / Remotes2 to 3 rear | 2 to 3 rear 2 mid Optional
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 3445 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 3445, but steering flow is 6.6 gpm | 25.0 lpm, pressure is 2610 psi | 180.0 bar, and lift is listed as 3,527 lbs | 1599 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 3445 hydraulics feel fast or slow?
The useful speed clue is 6.6 gpm | 25.0 lpm steering flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 3445 hydraulic pressure tell you?
The pressure spec is 2610 psi | 180.0 bar, above the 2,300 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Massey Ferguson 3445?
On the Massey Ferguson 3445, 6.6 gpm | 25.0 lpm steering flow points to slower loader and cylinder movement, 2,610 psi pressure affects force more than speed, and 3,527 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 3445?
For implement matching, the useful checks are 6.6 gpm flow, 2,610 psi pressure, 3,527 lb listed lift, and 2 to 3 rear | 2 to 3 rear 2 mid Optional remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, strong on hydraulic force if the cylinders and relief settings match, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 3445 rear lift capacity strong?
The listed lift figure is 3,527 lbs | 1599 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Massey Ferguson 3445 hydraulic remotes enough?
The Massey Ferguson 3445 remote/valve listing is 2 to 3 rear | 2 to 3 rear 2 mid Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 3445 hydraulics handle long hydraulic jobs?
The useful heat clues are 6.6 gpm flow, 2,610 psi pressure, and about 10.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 3445 make on paper?
Using 2,610 psi and 6.6 gpm, the rough pressure-flow estimate is about 10.1 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 3445 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 1/2 and listed lift is 3,527 lbs | 1599 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
