The Massey Ferguson 240 tractor engine horsepower is 46 hp | 34.3 kW, PTO horsepower is 41 hp | 30.6 kW, and the drawbar horsepower is 28.69 hp | 21.4 kW.
Massey Ferguson 240 Horsepower Specs
| Engine horsepower | 46 hp | 34.3 kW |
|---|---|
| PTO horsepower claimed | 41 hp | 30.6 kW |
| PTO horsepower tested | 34.77 hp | 25.9 kW |
| Drawbar horsepower tested | 28.69 hp | 21.4 kW |
Massey Ferguson 240 Useful Horsepower Calculations
| PTO-to-engine power transfer | 89.1% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 62.4% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 70% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 3.7 ci per PTO hp |
| PTO horsepower per liter | 16.4 PTO hp per L |
| Engine size per engine horsepower | 3.3 ci per engine hp |
| Engine horsepower per liter | 18.4 engine hp per L |
| Fuel tank per PTO horsepower | 0.3 gal per PTO hp |
| Rated speed per PTO horsepower | 48.8 rpm per PTO hp |
Massey Ferguson 240 Engine Specs
| Displacement | 152 ci | 2.5 L |
|---|---|
| Bore and stroke | 3.60×5.00 inches | 91 x 127 mm |
| Rated RPM | 2000 |
Massey Ferguson 240 Fuel, Cooling, Starting & Service Specs
| Fuel capacity | 12.6 gal | 47.7 L |
|---|---|
| Starter volts | 12 |
| Battery volts | 12 |
Massey Ferguson 240 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 240 Horsepower FAQ
How much horsepower does the Massey Ferguson 240 have?
The listed engine output is 46 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 46 hp.
How much PTO horsepower does the Massey Ferguson 240 have?
The listed PTO output is 41 hp, below the 65 hp benchmark average. For real use, size PTO implements below or near 41 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Massey Ferguson 240 have?
The listed drawbar output is 28.7 hp, below the 55 hp benchmark average. For pulling work, the safer assumption is about 28.7 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Massey Ferguson 240?
The PTO-to-engine transfer works out to 89.1%, from 46 engine hp to 41 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 240 for pulling work?
The drawbar-to-engine transfer is about 62.4%, from 46 engine hp to 28.7 drawbar hp. That means traction losses and drivetrain losses are a big part of the real pulling result.
Is the Massey Ferguson 240 better judged by PTO hp or drawbar hp?
The drawbar output is about 70% of PTO output, comparing 28.7 drawbar hp with 41 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 240 engine?
The engine displacement is 152 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 240 engine stressed for its PTO horsepower?
The engine has about 3.7 cubic inches per PTO hp, using 152 ci and 41 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Massey Ferguson 240 make?
The output density is about 16.4 PTO hp per liter, using 41 PTO hp and 2.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
