The Massey Ferguson 8480 tractor engine horsepower is 290 hp | 216.3 kW, PTO horsepower is 240 hp | 179.0 kW, and the drawbar horsepower is 210.9 hp | 157.3 kW.
Massey Ferguson 8480 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Massey Ferguson 8480 Horsepower Comparison Charts
Engine horsepower comparison
This model
290 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
240 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
210.9 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
513.8 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
2.1 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 8480 Horsepower FAQ
How much horsepower does the Massey Ferguson 8480 have?
The listed engine output is 290 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 290 hp.
How much PTO horsepower does the Massey Ferguson 8480 have?
The listed PTO output is 240 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 240 hp.
How much drawbar horsepower does the Massey Ferguson 8480 have?
The listed drawbar output is 210.9 hp, above the 150 hp benchmark average. That makes the 210.9 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How much engine power reaches the PTO on the Massey Ferguson 8480?
The PTO-to-engine transfer works out to 82.8%, from 290 engine hp to 240 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 8480 for pulling work?
The drawbar-to-engine transfer is about 72.7%, from 290 engine hp to 210.9 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Massey Ferguson 8480 better judged by PTO hp or drawbar hp?
The drawbar output is about 87.9% of PTO output, comparing 210.9 drawbar hp with 240 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 8480 engine?
The engine displacement is 513.8 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 8480 engine stressed for its PTO horsepower?
The engine has about 2.1 cubic inches per PTO hp, using 513.8 ci and 240 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Massey Ferguson 8480 make?
The output density is about 28.6 PTO hp per liter, using 240 PTO hp and 8.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
