The Massey Ferguson 210 tractor engine horsepower is 25 hp | 18.6 kW, PTO horsepower is 22 hp | 16.4 kW, and the drawbar horsepower is 17.28 hp | 12.9 kW.
Massey Ferguson 210 Horsepower Specs
| Engine horsepower | 25 hp | 18.6 kW |
|---|---|
| PTO horsepower claimed | 22 hp | 16.4 kW |
| PTO horsepower tested | 21.96 hp | 16.4 kW |
| Drawbar horsepower tested | 17.28 hp | 12.9 kW |
Massey Ferguson 210 Useful Horsepower Calculations
| PTO-to-engine power transfer | 88% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 69.1% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 78.5% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 3.5 ci per PTO hp |
| PTO horsepower per liter | 16.9 PTO hp per L |
| Engine size per engine horsepower | 3.1 ci per engine hp |
| Engine horsepower per liter | 19.2 engine hp per L |
| Torque per PTO horsepower | 2.5 lb-ft per PTO hp |
| Rated speed per PTO horsepower | 113.6 rpm per PTO hp |
Massey Ferguson 210 Engine Specs
| Displacement | 77.1 ci | 1.3 L |
|---|---|
| Bore and stroke | 3.62×3.74 inches | 92 x 95 mm |
| Compression | 23:1 |
| Rated RPM | 2500 |
| Torque | 54 lb-ft | 73.2 Nm |
| Torque RPM | 1800 |
Massey Ferguson 210 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Massey Ferguson 210 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 210 Horsepower FAQ
How much horsepower does the Massey Ferguson 210 have?
The listed engine output is 25 hp, below the 35 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 25 hp.
How much PTO horsepower does the Massey Ferguson 210 have?
The listed PTO output is 22 hp, below the 28 hp benchmark average. For real use, size PTO implements below or near 22 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Massey Ferguson 210 have?
The listed drawbar output is 17.3 hp, below the 24 hp benchmark average. For pulling work, the safer assumption is about 17.3 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Massey Ferguson 210?
The PTO-to-engine transfer works out to 88%, from 25 engine hp to 22 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 210 for pulling work?
The drawbar-to-engine transfer is about 69.1%, from 25 engine hp to 17.3 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Massey Ferguson 210 better judged by PTO hp or drawbar hp?
The drawbar output is about 78.5% of PTO output, comparing 17.3 drawbar hp with 22 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 210 engine?
The engine displacement is 77.1 ci, below the 110 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 210 engine stressed for its PTO horsepower?
The engine has about 3.5 cubic inches per PTO hp, using 77.1 ci and 22 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 210 make?
The output density is about 16.9 PTO hp per liter, using 22 PTO hp and 1.3 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
