The Massey Ferguson 1758 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.6 gpm | 43.9 lpm, hydraulic type is open center gear pump, and valves/remotes are listed as 1 to 3.
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 1758 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 1758, but SCV flow is 11.6 gpm | 43.9 lpm, system type is open center gear pump, and lift is listed as 3086 lbs | 1399 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 1758 hydraulics feel fast or slow?
The useful speed clue is 11.6 gpm | 43.9 lpm SCV flow, above the 8 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Massey Ferguson 1758?
On the Massey Ferguson 1758, 11.6 gpm | 43.9 lpm SCV flow points to quicker loader and cylinder movement and 3,086 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 1758?
For implement matching, the useful checks are 11.6 gpm flow, 3,086 lb listed lift, 1 to 3 remote/valve listing, and I hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 1758 rear lift capacity strong?
The listed lift figure is 3086 lbs | 1399 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Massey Ferguson 1758 hydraulic remotes enough?
The Massey Ferguson 1758 remote/valve listing is 1 to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 1758 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Massey Ferguson 1758 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position control | Optional, and listed lift is 3086 lbs | 1399 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 1758 use?
The hydraulic system is listed as open center gear pump with 11.6 gpm | 43.9 lpm SCV flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 1758 hydraulics?
For service planning, the system is listed as open center gear pump and flow is listed at 11.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
