The Massey Ferguson 1445 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 7.4 gpm | 28.0 lpm, hydraulic pressure is 2275 psi | 156.9 bar, and hydraulic type is open center.
about 9.8 hydraulic hp from listed pressure and pump flow
Massey Ferguson 1445 Hydraulic Comparison Charts
Pump flow comparison
This model
7.4 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Hydraulic pressure comparison
This model
2,275 psi
Average
2,300 psi
Low
1,800 psi
High
3,000 psi
Rear lift comparison
This model
3,086 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 1445 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 1445, but pump flow is 7.4 gpm | 28.0 lpm, pressure is 2275 psi | 156.9 bar, system type is open center, and lift is listed as 3086 lbs | 1399 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 1445 hydraulics feel fast or slow?
The useful speed clue is 7.4 gpm | 28.0 lpm pump flow, close to the 8 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the Massey Ferguson 1445 hydraulic pressure tell you?
The pressure spec is 2275 psi | 156.9 bar, close to the 2,300 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 1445?
On the Massey Ferguson 1445, 7.4 gpm | 28.0 lpm pump flow is around normal for loader/cylinder speed, 2,275 psi pressure affects force more than speed, and 3,086 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 1445?
For implement matching, the useful checks are 7.4 gpm flow, 2,275 psi pressure, 3,086 lb listed lift, and I hitch. That combination is in the normal flow range for this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 1445 rear lift capacity strong?
The listed lift figure is 3086 lbs | 1399 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Massey Ferguson 1445 hydraulics handle long hydraulic jobs?
The useful heat clues are 7.4 gpm flow, 2,275 psi pressure, and about 9.8 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 1445 make on paper?
Using 2,275 psi and 7.4 gpm, the rough pressure-flow estimate is about 9.8 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 1445 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position and draft control, and listed lift is 3086 lbs | 1399 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 1445 use?
The hydraulic system is listed as open center with 7.4 gpm | 28.0 lpm pump flow and 2275 psi | 156.9 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
