The Massey Ferguson 133 Westland tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 4.8 gpm | 18.2 lpm, hydraulic pressure is 2500 psi | 172.4 bar, and hydraulic type is open center.
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 133 Westland hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 133 Westland, but pump flow is 4.8 gpm | 18.2 lpm, pressure is 2500 psi | 172.4 bar, system type is open center, and lift is listed as 3150 lbs | 1428 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 133 Westland hydraulics feel fast or slow?
The useful speed clue is 4.8 gpm | 18.2 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 133 Westland hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 133 Westland?
On the Massey Ferguson 133 Westland, 4.8 gpm | 18.2 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 3,150 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 133 Westland?
For implement matching, the useful checks are 4.8 gpm flow, 2,500 psi pressure, 3,150 lb listed lift, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 133 Westland rear lift capacity strong?
The listed lift figure is 3150 lbs | 1428 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Massey Ferguson 133 Westland hydraulics handle long hydraulic jobs?
The useful heat clues are 4.8 gpm flow, 2,500 psi pressure, and about 7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 133 Westland make on paper?
Using 2,500 psi and 4.8 gpm, the rough pressure-flow estimate is about 7 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 133 Westland hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position and draft control, and listed lift is 3150 lbs | 1428 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 133 Westland use?
The hydraulic system is listed as open center with 4.8 gpm | 18.2 lpm pump flow and 2500 psi | 172.4 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
