The Massey Ferguson 133 tractor hydraulic capacity is 7.1 gal | 26.9 L, pump flow is 4.8 gpm | 18.2 lpm, and hydraulic pressure is 2490 psi | 171.7 bar.
about 7 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
26.9 L capacity with 4.8 gpm pump flow
Massey Ferguson 133 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
7.1 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
4.8 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,490 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
3,150 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Is the Massey Ferguson 133 hydraulic capacity big or small for its size?
The Massey Ferguson 133 lists 7.1 gal | 26.9 L of hydraulic capacity, which is below the 18 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 133 hydraulics feel fast or slow?
The useful speed clue is 4.8 gpm | 18.2 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 133 hydraulic pressure tell you?
The pressure spec is 2490 psi | 171.7 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 133?
On the Massey Ferguson 133, 4.8 gpm | 18.2 lpm pump flow points to slower loader and cylinder movement, 2,490 psi pressure affects force more than speed, and 3,150 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 133?
For implement matching, the useful checks are 4.8 gpm flow, 2,490 psi pressure, 3,150 lb listed lift, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 133 rear lift capacity strong?
The listed lift figure is 3150 lbs | 1428 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Massey Ferguson 133 hydraulics handle long hydraulic jobs?
The useful heat clues are 7.1 gal of hydraulic capacity, 4.8 gpm flow, 2,490 psi pressure, and about 7 hydraulic hp by the pressure-flow estimate. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
How much hydraulic power does the Massey Ferguson 133 make on paper?
Using 2,490 psi and 4.8 gpm, the rough pressure-flow estimate is about 7 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 133 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position and draft control, and listed lift is 3150 lbs | 1428 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Massey Ferguson 133 hydraulics?
For service planning, the oil-volume figure is 7.1 gal | 26.9 L, pressure is listed at 2,490 psi, and flow is listed at 4.8 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
