The Massey Ferguson 1030 tractor engine horsepower is 26 hp | 19.4 kW, PTO horsepower is 23 hp | 17.2 kW, and the drawbar horsepower is 18.29 hp | 13.6 kW.
Massey Ferguson 1030 Horsepower Specs
| Engine horsepower | 26 hp | 19.4 kW |
|---|---|
| PTO horsepower claimed | 23 hp | 17.2 kW |
| PTO horsepower tested | 23.35 hp | 17.4 kW |
| Drawbar horsepower tested | 18.29 hp | 13.6 kW |
Massey Ferguson 1030 Useful Horsepower Calculations
| PTO-to-engine power transfer | 88.5% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 70.3% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 79.5% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 3.8 ci per PTO hp |
| PTO horsepower per liter | 16.4 PTO hp per L |
| Engine size per engine horsepower | 3.3 ci per engine hp |
| Engine horsepower per liter | 18.6 engine hp per L |
| Rated speed per PTO horsepower | 108.7 rpm per PTO hp |
Massey Ferguson 1030 Engine Specs
| Displacement | 86.9 ci | 1.4 L |
|---|---|
| Bore and stroke | 3.228×3.543 inches | 82 x 90 mm |
| Compression | 23:1 |
| Rated RPM | 2500 |
Massey Ferguson 1030 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
| Firing order | 1-3-2 |
Massey Ferguson 1030 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 1030 Horsepower FAQ
How much horsepower does the Massey Ferguson 1030 have?
The listed engine output is 26 hp, below the 35 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 26 hp.
How much PTO horsepower does the Massey Ferguson 1030 have?
The listed PTO output is 23 hp, below the 28 hp benchmark average. For real use, size PTO implements below or near 23 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Massey Ferguson 1030 have?
The listed drawbar output is 18.3 hp, below the 24 hp benchmark average. For pulling work, the safer assumption is about 18.3 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Massey Ferguson 1030?
The PTO-to-engine transfer works out to 88.5%, from 26 engine hp to 23 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 1030 for pulling work?
The drawbar-to-engine transfer is about 70.3%, from 26 engine hp to 18.3 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Massey Ferguson 1030 better judged by PTO hp or drawbar hp?
The drawbar output is about 79.5% of PTO output, comparing 18.3 drawbar hp with 23 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 1030 engine?
The engine displacement is 86.9 ci, below the 110 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 1030 engine stressed for its PTO horsepower?
The engine has about 3.8 cubic inches per PTO hp, using 86.9 ci and 23 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 1030 make?
The output density is about 16.4 PTO hp per liter, using 23 PTO hp and 1.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
