The Kubota SMZ76 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 6,393 lb (2,900 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight6,393 lb (2,900 kg)
Kubota SMZ76 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
6,393 lb (2,900 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
6,393 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota SMZ76 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota SMZ76 rear hitch spec points to 1,200 lb (544 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota SMZ76, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The 8.2 gpm (31 L/min) hydraulic flow figure helps round out the Kubota SMZ76’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 6,393 lb (2,900 kg) operating weight gives context for the Kubota SMZ76’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
The practical reason to check rear lift on the Kubota SMZ76 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota SMZ76 3-Point Hitch FAQ
What is the Kubota SMZ76 3-point hitch lift capacity?
The Kubota SMZ76 is listed with 1,200 lb (544 kg) for lift at 24 inches behind the link ends. That makes it a compact rear-lift tractor, so it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades.
What does the Kubota SMZ76 24-inch lift capacity mean?
It means the Kubota SMZ76 is rated to lift 1,200 lb (544 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota SMZ76 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 1,200 lb (544 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota SMZ76 lift?
Use the 1,200 lb (544 kg) rating at 24 inches behind the link ends as the first filter for implements such as box blade, small rotary cutter, tiller, ballast box, and rear blade. Also check hitch category Category 1 and operating weight 6,393 lb (2,900 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota SMZ76?
Yes. The Kubota SMZ76 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 6,393 lb (2,900 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
