The Kubota MZ70 has a 3-point hitch lift capacity of 1,500 lb (680 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 5,622 lb (2,550 kg).
Best rear lift figure1,500 lb (680 kg)
Lift at 24 inches1,500 lb (680 kg)
Hitch categoryCategory 1
Operating weight5,622 lb (2,550 kg)
Kubota MZ70 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
1,500 lb (680 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
5,622 lb (2,550 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
5,622 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota MZ70 Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota MZ70, 1,500 lb (680 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota MZ70 hitch category is listed as Category 1. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hydraulic flow note
For hydraulic context, the Kubota MZ70 is listed at 8.2 gpm (31 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota MZ70’s captured operating weight is 5,622 lb (2,550 kg), which affects ballast, traction and stability
Rear implement matching
Use the Kubota MZ70’s hitch capacity as a filter before shopping for box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota MZ70 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota MZ70?
Rear lift capacity for the Kubota MZ70 is shown as 1,500 lb (680 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota MZ70 is listed at 1,500 lb (680 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota MZ70?
Yes. The Kubota MZ70 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota MZ70?
Start with 1,500 lb (680 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota MZ70?
No. The Kubota MZ70 may list 1,500 lb (680 kg) of rear lift, but the 5,622 lb (2,550 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
