The Kubota MZ65 tractor is 84.7 in long, 62.6 in wide, and 82.3 in tall.
Length84.7 in (7 ft 0.7 in) / 2,151.4 mm
Width62.6 in (5 ft 2.6 in) / 1,590 mm
Height82.3 in (6 ft 10.3 in) / 2,090.4 mm
Ground clearance18.1 in (1 ft 6.1 in) / 459.7 mm
Kubota MZ65 Dimensions
Overall length
84.7 in (7 ft 0.7 in) / 2,151.4 mm
Overall width
62.6 in (5 ft 2.6 in) / 1,590 mm
Overall height
82.3 in (6 ft 10.3 in) / 2,090.4 mm
Ground clearance
18.1 in (1 ft 6.1 in) / 459.7 mm
Tractor Size Comparison Chart
Overall length comparison
This model
84.7 in
Average
125 in
Low
100 in
High
155 in
Overall width comparison
This model
62.6 in
Average
60 in
Low
45 in
High
78 in
Overall height comparison
This model
82.3 in
Average
89 in
Low
70 in
High
108 in
Ground clearance comparison
This model
18.1 in
Average
12 in
Low
8 in
High
17 in
Kubota MZ65 Extra Dimension Notes
Storage fit note
For shed fit, the Kubota MZ65 is not oversized. With length 84.7 in (7 ft 0.7 in) / 2,151.4 mm, width 62.6 in (5 ft 2.6 in) / 1,590 mm, and height 82.3 in (6 ft 10.3 in) / 2,090.4 mm, a good garage, carport or compact shed may be workable.
Fitment note
For the Kubota MZ65, the main fitment numbers are length at 84.7 in (7 ft 0.7 in) / 2,151.4 mm, width at 62.6 in (5 ft 2.6 in) / 1,590 mm, and height at 82.3 in (6 ft 10.3 in) / 2,090.4 mm. These are the specs to check against a shed, trailer or gate.
Ground clearance note
The listed Kubota MZ65 ground clearance is 18.1 in (1 ft 6.1 in) / 459.7 mm. This matters most when the underside has to clear crop, rocks, ridges or rough tracks.
Storage Tips
For the Kubota MZ65, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
Measure the lowest overhead point, not the tallest part of the shed roof.
Storage FAQ
What size garage will fit the tractor?
At 84.7 in long, 62.6 in wide, and 82.3 in tall, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft high, 8 ft wide, and 15 ft deep before counting attachments.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 82.3 in height, 62.6 in width and 84.7 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 82.3 in for overhead clearance, 62.6 in for side clearance and 84.7 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 84.7 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
