The Kubota MR77 has a 3-point hitch lift capacity of 2,200 lb (998 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2, hydraulic pump flow 14.7 gpm (55.6 L/min), and operating weight 6,923 lb (3,140 kg).
Best rear lift figure2,200 lb (998 kg)
Lift at 24 inches2,200 lb (998 kg)
Hitch categoryCategory 1 / Category 2
Operating weight6,923 lb (3,140 kg)
Kubota MR77 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
2,200 lb (998 kg)
Hitch category
Category 1 / Category 2
Hydraulic pump flow
14.7 gpm (55.6 L/min)
Operating weight
6,923 lb (3,140 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
14.7 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
6,923 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota MR77 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota MR77 rear hitch spec points to 2,200 lb (998 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota MR77, start with Category 1 / Category 2, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota MR77’s captured hydraulic pump flow is 14.7 gpm (55.6 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota MR77 operating weight is listed as 6,923 lb (3,140 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
The practical reason to check rear lift on the Kubota MR77 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota MR77 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota MR77?
Rear lift capacity for the Kubota MR77 is shown as 2,200 lb (998 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota MR77 is listed at 2,200 lb (998 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota MR77?
Yes. The Kubota MR77 is listed as Category 1 / Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota MR77?
Start with 2,200 lb (998 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Is lift capacity enough to size implements for the Kubota MR77?
No. The Kubota MR77 may list 2,200 lb (998 kg) of rear lift, but the 6,923 lb (3,140 kg) operating weight and 14.7 gpm (55.6 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
